Sump pumps · maintenance
Sump pit smells: causes and fixes
A sump pit collects groundwater, so it should not smell like much. When the basement starts to smell musty, like rotten eggs, or like sewage near the pit, the cause is usually stagnant water, debris, something draining into the pit that should not, or a sewer problem nearby.
Bottom line
Identify the kind of smell first. Musty or swampy usually means stagnant water and debris; clean the pit and fit a sealed lid. A true sewage smell means wastewater may be getting in, and that is a job for a licensed plumber, not air freshener.
Match the smell to the cause
| Smell | Common causes |
|---|---|
| Musty, damp, swampy | Water sitting in the pit for weeks, silt and organic debris, mold on the lid or nearby walls |
| Rotten eggs (sulfur) | Bacteria in stagnant water; in some homes, sulfur in groundwater or a softener or laundry discharge feeding the pit |
| Sewage | A cracked drain line or leaking sewer pipe near the pit, a laundry or other wastewater line piped into the sump, or a dry floor-drain trap nearby |
| Soapy or detergent | Washing machine or laundry sink draining to the pit |
What to check, in order
- Is it the pit? Sniff at the lid, then at nearby floor drains. A floor drain whose trap has dried out lets sewer gas up; pouring water into it refills the trap.
- What drains into the pit? Look for laundry hoses, a laundry sink, or a softener drain line ending in the sump. Many local codes do not allow wastewater or softener discharge to a sump; a licensed plumber can reroute it, with a proper air gap for the softener.
- Standing water and debris. If the pump rarely runs, water can sit and go stale. Clean the pit, remove silt and debris, and check the float and intake screen.
- Cycle the pump. Running a bucket or two of clean water through the pit refreshes standing water and confirms the pump works. See testing a sump pump.
- Lid and seal. An open or loose lid lets odors and humidity into the basement. A sealed lid with gasketed cutouts helps; in radon areas see radon-sealed sump covers.
- Sewage smell persists. Have a licensed plumber look for a leaking or cracked sewer line, often with a camera inspection.
Cleaning cautions
- Unplug the pump before reaching into the pit, and keep the cord and outlet dry.
- Never mix cleaning chemicals, such as bleach with ammonia or acid cleaners.
- Check the pump manual before adding any cleaner or deodorizer to the pit; some can harm seals or switches.
- Odor products only mask the smell. Fix the source.
- Radon has no smell. A lack of odor does not mean the air is fine; test if your area has radon.
Parts
- Airtight sump pit covers (Amazon search, high to low) — measure the basin diameter and pipe and cord cutouts before ordering
- Sump lid gaskets and pipe grommets (Amazon search, high to low) — to seal around the discharge pipe and cords on an existing lid
Getting help
Start with a licensed plumber for sewage odors, rerouting laundry or softener drains, and sewer line inspection. A waterproofing pro can help with sealed lids and recurring silt. R.E. Merrill & Associates has handled industrial and municipal pumps and fluid systems since 1987 — Contact R.E. Merrill & Associates.
Related across the site
Sources
- Sump pump and basin manufacturer installation and maintenance guides.
- Local plumbing code and a licensed plumber for discharge and drain questions.
- EPA consumer guidance on radon testing.