Section · fixtures and faucets

Fixtures

Homeowner guides on kitchen faucets, shower valves, toilet tank repairs, supply lines and shutoff valves, and sink drains. A licensed plumber first for anything in the wall or anything your local code requires a permit for.

Published · 1

Kitchen faucet buying guide

Hole count and clearance, pull-down vs pull-out, cartridges, finishes, flow limits, and install basics.

Published · 2

Shower valve types explained: pressure-balance vs thermostatic

How each valve protects against scalds, valve body vs trim, limit stops, diverters, and common problems.

Published · 3

Toilet fill valve and flapper fixes

Dye test, symptoms and fixes, 2-inch vs 3-inch flappers, and step-by-step fill valve replacement.

Published · 4

Supply lines and shutoff valves: braided lines and angle stops

Connection sizes, braided lines, quarter-turn vs multi-turn stops, and replacement steps.

Published · 5

P-traps and sink drain hardware: fixing leaks under the sink

Parts from strainer to trap arm, finding the leak, slip-joint washers, clearing clogs, and trap sizes.

Published · 6

Bathroom faucet cartridges: identify and replace

Cartridge types, how to identify yours, worn-cartridge symptoms, and how replacement usually goes.

Published · 7

Low-flow showerheads: comfort, codes, and upgrades

Federal flow caps, WaterSense, comfort tips, hard-water clogging, and when a plumber should touch the valve.

Published · 8

Garbage disposal basics: how they work, use, and replacement

Continuous vs batch feed, what not to grind, resets and jams, septic notes, and licensed plumber installs.

Published · 9

Toilet leaking at the base: wax ring and flange

Base leaks: wax ring vs bolts vs condensation, what the flange does, and when a plumber should take over.

Published · 10

Plunger vs toilet auger vs drain snake

Which clog tool fits which drain, how to use each safely, and when to stop and call a licensed plumber.

Published · 11

Leaky tub spout and diverter: what to fix

Valve cartridge vs worn spout diverter, slip-on vs threaded spouts, swapping a spout, and when to call a plumber.

Published · 12

Faucet aerators: cleaning, sizing, and low-flow options

Clogged or low-flow aerators: how to clean them, thread sizes and flow ratings, and hidden aerators.

Published · 13

Frost-free sillcocks and outdoor faucets: leaks and winter care

How frost-free hose bibs work, why hoses cause hidden splits, freeze-damage signs, winter care, vacuum breakers, and repair vs replace.

Published · 14

Choosing a new toilet: rough-in, flush rating, and fit

Measure rough-in, choose shape and height, compare WaterSense and MaP flush ratings, and know what parts to add.

Published · 15

Finding and using the whole-house water shutoff

Where the main shutoff usually is, ball vs gate valves, closing and reopening safely, labeling, and when a stuck valve needs a plumber.

Published · 16

Washing machine hoses: burst prevention and replacement

Rubber vs braided fill hoses, warning signs, a simple replacement, turning valves off when away, leak pans and sensors, and when the outlet box needs a plumber.

Published · 17

Water hammer: causes and arrestors

Banging pipes when a valve snaps shut: check pressure, recharge old air chambers, add arrestors at quick-closing valves, and secure loose pipe.

Published · 18

How to replace a kitchen faucet

Match the holes and connections, test the shutoffs, remove the old faucet, install and flush the new one, and know when seized valves or a tight cabinet mean calling a plumber.