Fixtures · tub and shower
Leaky tub spout and diverter: what to fix
Two different tub spout problems get lumped together: a spout that drips when everything is off, and a spout that keeps pouring while the shower is running. The first is usually the valve; the second is usually the spout itself. Telling them apart saves a wasted trip to the store.
Bottom line
Dripping when off means the shower valve cartridge or washers. Water from the spout during a shower means a worn diverter in the spout, which is usually fixed by replacing the spout. Call a licensed plumber for valve cartridges that won’t come out, soldered stubs, or any leak inside the wall.
Which problem do you have?
| Symptom | Usual cause | Fix |
|---|---|---|
| Spout drips with the handle off | Worn valve cartridge, seats, or washers | Rebuild or replace the cartridge; see shower valve types |
| Strong flow from the spout while showering | Worn diverter gate inside the spout | Replace the spout |
| Diverter knob or lever hard to pull or drops back | Scale or wear on the diverter | Replace the spout; hard water speeds this up |
| Three-handle valve, spout runs during shower | Worn middle diverter stem | Diverter stem or washer; plumber if stuck |
| Water behind the spout or stains below the tub | Leak at the pipe or in the wall | Licensed plumber |
Slip-on vs threaded spouts
- Slip-on — slides over a smooth 1/2″ copper stub and is held by a set screw on the underside. Loosen the set screw and pull straight off.
- Threaded — screws onto a threaded pipe nipple (commonly 1/2″ IPS) or an adapter soldered to copper. No set screw underneath; unscrew counterclockwise, using a cloth or a dowel in the opening for grip.
- Measure how far the pipe sticks out from the finished wall. Replacement spouts list the stub length they accept; some include adapters for both styles.
Swapping a spout
- Confirm the style (look for the set screw) and measure the stub.
- Remove the old spout and clean old caulk and scale from the wall and pipe.
- For threaded spouts, wrap the nipple threads with thread tape. For slip-on spouts, follow the spout’s O-ring or clamp instructions.
- Install snug against the wall without forcing it. Over-tightening can twist a pipe inside the wall.
- Caulk the top and sides per the manufacturer’s instructions, and test both tub and shower.
Parts
- Tub spouts with diverters (Amazon search, high to low) — match slip-on or threaded, finish, and stub length
- Universal slip-on/threaded tub spouts (Amazon search, high to low) — useful when you are not sure what is behind the old spout
- Shower valve cartridges (Amazon search, high to low) — brand and model specific; take the old cartridge with you
Getting help
Start with a licensed plumber for valve cartridges, soldered connections, or any leak behind the wall. R.E. Merrill & Associates has handled industrial and municipal pumps and fluid systems since 1987 — Contact R.E. Merrill & Associates.
Related across the site
Sources
- Tub spout and shower valve manufacturer installation instructions.
- Local plumbing code and a licensed plumber for the specific home.