Well pumps · wellhead
Sanitary well caps and wellhead upgrades
The well cap is the lid on top of your casing. A sanitary cap seals out insects, rodents, surface water, and debris while letting the well breathe through a screened vent. An old loose cap or a buried casing is one of the most common, and most fixable, ways a private well gets contaminated.
Bottom line
If your cap is cracked, loose, missing its gasket, or has an unscreened vent — or the casing ends at or below the ground — have a licensed well contractor fit a sanitary cap and correct the casing height and grading. Shock-chlorinate and retest after any wellhead work. Most states license well contractors and set wellhead rules; follow yours.
Safety first
The wellhead carries the pump’s power wiring. Turn off the pump breaker before lifting a cap, never drop anything down the casing, and leave pump pulling and casing work to a licensed well contractor.
Sanitary cap vs an old cap
| Feature | Sanitary (vermin-proof) cap | Typical old cap |
|---|---|---|
| Seal | Gasket clamps to the casing | Loose lid or slip-on cover |
| Vent | Screened and turned down | Open gaps or no screen |
| Fasteners | Bolts that hold the cap tight | Set screws or nothing |
| Wire entry | Sealed conduit or grommet | Open hole |
Signs the wellhead needs work
- Cap is cracked, rusted through, or lifts off by hand.
- Insects, spiders, or droppings under the cap.
- Casing ends at or below grade, in a pit, or where water pools after rain.
- A positive coliform bacteria test, or cloudy water after storms — see well water testing.
- Soil slopes toward the casing instead of away from it.
What a wellhead upgrade usually includes
- Matching a sanitary cap to the casing’s outside diameter and material (steel or PVC; 6 inch is common on residential wells).
- Extending the casing above grade to your state’s minimum height if it is short or in a pit.
- Regrading or adding a sloped pad so surface water runs away from the casing.
- Sealing the wire entry and checking the pitless adapter area.
- Shock chlorination and a follow-up bacteria test — see how to shock-chlorinate a well.
When to call a pro
- Casing at or below grade, in a pit, or damaged — a licensed well contractor.
- Positive bacteria test or water quality change after storms — a licensed well contractor plus your local health department for testing guidance.
- Pump or wiring problems found at the wellhead — a licensed well contractor.
Getting help
Start with a licensed well contractor for wellhead and pump work. R.E. Merrill & Associates has handled industrial and municipal pumps and fluid systems since 1987 and can talk through Grundfos submersible well pumps — contact R.E. Merrill & Associates.
Related across the site
- Rotten-egg smell, H₂S, and iron bacteria — water-quality problems that can follow a poor wellhead
- Septic system basics — keep the septic field a safe distance from the well
Sources
- U.S. EPA private drinking water well guidance for homeowners.
- State well construction codes and licensed well contractor rules — casing height, caps, and grading.
- Well cap manufacturer installation instructions.