Well pumps · backup power
Well pumps in a power outage: generator basics
When the grid goes down, a private-well home usually loses water as soon as the pressure tank empties — the pump needs electricity. Backup power can keep the well (and often a sump pump) running, but the connection method matters as much as the generator itself. This page covers safe concepts only — not generator or pump sizing numbers.
What stops when the power fails
- The well pump — submersible or jet — needs line power (or a properly connected generator).
- Pressure stays briefly from the pressure tank, then drops as you use water — see pressure-tank precharge.
- Treatment gear (softener valve, UV, RO booster) may also need power.
- Sump pumps on the same outage need their own plan — battery or water-powered backup — see battery backup sump pumps.
Safe connection concepts (no DIY backfeeding)
| Approach | Idea | Who installs |
|---|---|---|
| Manual or automatic transfer switch | Selects grid or generator; isolates the utility so you cannot energize downed lines | Licensed electrician |
| Panel interlock kit | Mechanical lock so the main breaker and generator breaker cannot both be on | Licensed electrician; must match your panel and local code |
| Inlet + labeled generator breaker | Outdoor inlet corded to a dedicated breaker behind the interlock or transfer gear | Licensed electrician |
| Backfeeding through a household outlet | Dangerous and illegal in most places — risks electrocution of utility workers and fire | Do not do this |
Portable generators need outdoor placement, dry footing, and carbon-monoxide awareness — never run one in a garage, basement, or near open windows. Standby (automatic) generators are a larger project with fuel, pad, and transfer equipment sized by the electrician and generator dealer.
Load planning without inventing sizes
- List the circuits you truly need in an outage: well pump, maybe fridge, heat system controls, sump, a few lights.
- Motors (well pumps, some sump pumps) draw a short startup surge above running watts. Your electrician and generator dealer match that to the generator — we do not publish sizing charts here.
- Constant-pressure systems (for example some Grundfos SQE setups) and soft-start controls change the electrical picture — bring the pump model to the electrician — see SQ vs SQE.
- Do not assume a small “campsite” generator will start a deep well pump. Verify before the storm.
Outage habits that help
- Know where the well’s pressure switch and breaker are — see pressure-switch basics.
- After power returns (or the generator starts), listen for short cycling or odd noises — see short cycling.
- Store a few gallons of drinking water anyway; backup power can fail or be delayed.
- If you have a sump, treat basement flood prep as a separate checklist — see basement flood-prep kit.
When to call a pro
- Any generator-to-panel connection, interlock, transfer switch, or inlet — a licensed electrician.
- Pump replacement, control-box work, or well performance questions — a licensed well contractor.
- Standby generator fuel lines, pads, and automatic transfer — electrician plus the generator dealer’s install network.
Start with a licensed electrician for backup-power connections and a licensed well contractor for the pump. R.E. Merrill & Associates has handled industrial and municipal pumps and fluid systems since 1987 and can talk through Grundfos submersible well pumps — contact R.E. Merrill & Associates.
Related across the site
- Battery backup sump pumps — basement protection when the grid is down
- Water-powered backup sumps — needs municipal water pressure; not a private-well outage fix
- Residential well pump basics
Sources
- National Electrical Code (NFPA 70) requirements for optional standby systems and transfer equipment — as adopted locally.
- Generator manufacturer installation manuals — placement, grounding, and transfer methods.
- Well pump manufacturer electrical requirements for the specific model.