Sump pumps · troubleshooting

Sump pump runs constantly or won’t shut off

A sump pump that never stops is either fighting real water or stuck. The two look similar from the stairs, but the fixes are very different. A pump that runs without moving water will burn out, so it is worth sorting out the same day.

Bottom line Look in the pit. If water is coming in steadily and the pump is keeping up, it is doing its job. If the pit is low and the pump still runs, suspect the float or switch. Unplug before reaching in, and call a licensed plumber or waterproofing pro for anything beyond freeing a float.

Read the pit first

What you seeLikely causeNext step
Pit is low or empty, pump keeps runningFloat stuck up, tangled cord, or failed switchUnplug, free the float; see float switches
Pit drains, pump stops, then water rushes back and it restartsFailed or missing check valveSee sump check valves
Pump hums or runs, water level does not dropAir lock, clogged intake, jammed or worn impellerUnplug, clean intake; check weep hole; see clean the pit
Pump runs, no water exits outsideDischarge blocked or frozenSee frozen discharge
Steady inflow, pump keeps up but never restsHigh water table or heavy rain; pump may be undersizedSee choosing a primary pump

Safe checks

  1. Unplug the pump (or switch off its circuit) before touching anything in the pit.
  2. Check that a tethered float can swing freely and is not caught on the pit wall, liner, or discharge pipe. Vertical floats should slide without binding.
  3. Clear silt and debris from the intake screen.
  4. Plug back in and fill the pit with a bucket of water. Watch the pump start, drop the level, and stop. See the sump test checklist.
  5. Go outside and confirm water is leaving the discharge.

If the pump really is keeping up with water

Constant running during heavy rain or snowmelt can be normal. Long stretches of nonstop running, though, wear the motor and leave you exposed if it fails. A properly sized primary, a battery backup, and a high-water alarm are the usual answer; a waterproofing pro can look at drainage and grading if inflow never lets up.

Parts and upgrades

Getting help

Start with a licensed plumber or waterproofing pro for a pump that runs nonstop, burned-out pumps, or constant groundwater inflow. R.E. Merrill & Associates has handled industrial and municipal pumps and fluid systems since 1987 — Contact R.E. Merrill & Associates.

Related across the site

Sources

More in this section