Well pumps · troubleshooting

Is my well running dry? Yield, recovery, and what to do

Sputtering faucets, pressure that fades during a long shower, or muddy water late in a dry summer can all mean the water level in the well is dropping below the pump. Sometimes the well is fine and the problem is the pump or plumbing. Sorting that out early protects the pump and gives you more options.

Bottom line If water stops or sputters and comes back after the well rests for a while, the well may not be keeping up with demand. Cut water use, protect the pump from running dry, and have a licensed well contractor measure the water level and yield before deciding on a fix. Your county or state health department can also tell you about local drought conditions and well rules.

Signs the well may be running low

Yield and recovery in plain terms

Is it the well or something else?

CluePoints toward
Water returns after resting; worse in dry monthsLow yield or a falling water table
Low pressure all the time, even after restPressure switch, tank, filters, or pump wear; see low water pressure on a well
Pump cycles rapidlyTank or switch; see well short cycling
Pressure drops overnight with no useCheck valve or a leak; see check valves
Toilet running, outdoor leak, or irrigation zone stuck onA leak draining the well; fix it first

Short-term steps

  1. Spread out water use: one load of laundry at a time, shorter showers, no lawn watering or car washing.
  2. Fix running toilets and dripping fixtures, and check outdoor spigots and irrigation.
  3. If the pump loses water, turn it off at the breaker and let the well recover rather than letting it run dry. Many submersible pumps can be damaged by dry running.
  4. Ask your contractor whether your pump has dry-run protection. Some pumps, such as the Grundfos SQ and SQE, include it; other systems can add a pump-protection control.
  5. If water looks or smells different after a low spell, consider testing the water.

Long-term options a contractor may suggest

Tools and references

Getting help

Start with a licensed well contractor to measure water levels and yield, check the pump and controls, and recommend a fix. For pumps sized to a low-yield well, R.E. Merrill & Associates can help with Grundfos residential well pumps. R.E. Merrill & Associates has handled industrial and municipal pumps and fluid systems since 1987 — Contact R.E. Merrill & Associates.

Related across the site

Sources

More in this section